Ayyeka’s Basic Wavelet includes the ultra low-power datalogger and telemetry Wavelet device, the Wavelet Activator, an external power connector, and installation hardware. The Basic Wavelet is offered in a series of configurations including a single analog port, serial port, or discrete port layout. The Combined Basic Wavelet is the most common and modular of the Wavelet configurations, with (1) analog, (1) serial, and (1) discrete port. Customers can also select a customized configuration of the Wavelet’s (3) ports, which can support up to 10 sensors using distribution cables.
Once a sensor is properly installed and connected to the Wavelet, the system can be activated using the Wavelet Activator. There is a 10-minute activation sequence, after which the Wavelet can be located via GPS by logging into the Ayyeka Data Hub, as continuous data begins to flow from the device. The Wavelet can then be configured over-the-air in order to set threshold alerts, sampling and transmission intervals, permissions, and more.