The maximum number of thresholds is a function of the number of channels, levels, and SETPARAM action.
Go to the DEVICE ADVANCED CONFIGURATION section for the device, and then go to the the Serial | Analog | Digital dropdown list. Note the following parameters:
-
In Channel > channel_number dropdown list, note the value of graph_level_count. The number is primarily determined by the firmware version of the device.
-
In Level > channel_number dropdown list, note the value of level_setparam_count. The number of parameters that you define across all channels of a sensor type – Serial, Analog, Digital – contributes to the SETPARAM_COUNT for that sensor type.
The following table lists the default maximum values of channels, levels, and SETPARAM commands that each device type can have. Cell entries in green indicate values that are different than the default values. “Device” includes Wavelet V2™, Wavelet 4™, and Wavelet Ex™.
|
DefaultMax Value |
Device PLS no LoRa |
Device PLS with LoRa |
Device ELS no LoRa |
Device ELS with LoRa |
Device WaveCam |
Device 4R_ Full |
Device 4R_ Sciroot |
Device 4R_ Wave Cam |
|
|
Serial CHANNEL_COUNT |
16 |
16 |
16 |
16 |
16 |
8 |
16 |
16 |
8 |
|
Serial LEVEL_COUNT |
30 |
30 |
30 |
30 |
30 |
15 |
30 |
30 |
15 |
|
Serial SETPARAM_COUNT |
30 |
30 |
30 |
30 |
30 |
15 |
30 |
30 |
15 |
|
Analog CHANNEL_COUNT |
4 |
4 |
4 |
4 |
4 |
4 |
2 |
1 |
2 |
|
Analog LEVEL_COUNT |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
|
Analog SETPARAM_COUNT |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
|
Digital CHANNEL_COUNT |
6 |
6 |
6 |
6 |
6 |
6 |
2 |
2 |
2 |
|
Digital LEVEL_COUNT |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
|
Digital SETPARAM_COUNT |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
The table values might change in future versions of firmware and software.